Alu pex Systeme

Henco 20 x 16 x 20 mm PVDF Press-T-Stück für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

Pressadapter aus korrosionsbeständigem Material. Presskappe aus Edelstahl. Entwickelt für Trinkwasser- und Heizungssysteme. - Stoppring, Druckanzeige, Farbcode, garantiert dicht wenn nicht gepresst. - Kein Entgraten und Kalibrieren erforderlich.- Zylindrisches Innengewinde nach EN 10226-1 für Dichtung.Verwendung nur mit Uponor MLC-, Uni Pipe PLUS- und Metallic Pipe PLUS-Rohren sowie mit von Uponor zugelassenen Presswerkzeugen möglich.

Henco 26 x 26 mm PVDF Pressgeradekupplung für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Uponor 1070549 Sanitärarmatur Kompressionskuppler

Geberit Mepla Adapter mit männlichem Gewinde: d=20mm, R=3/4

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free. Cylindrical external thread according to EN 10226-1 for packing.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 32, R: 1

Used with Roth alu-laserplus pipe and Roth tools

Used for transition from alu-pipe to pipe thread

Henco Pressbiege mit 16 mm Presse und 12 Außengewinde. Maximal 16 bar.

Raxofix Adapter mit SC-Contur-Siliziumbronze-Pressanschluss, R-Gewinde: 16, R: 12

Geberit Mepla Reduzierstück: d=26mm, d1=16mm

Uponor 1046918 Sanitärarmatur Endzufuhr-Reduzierer

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 20, R: 34

Uponor 1046921 Sanitärarmatur Endzufuhr-T-Stück

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 25, Rp: 1

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Pressfittings für Fußbodenheizung, Trinkwasser und Heizkörpersysteme. Können nur mit Uponor MLCP-Rohren und Uponor-zugelassenen Presswerkzeugen verwendet werden. Kunststoff

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Uponor 1046920 Sanitärarmatur Endzufuhr-Reduzierer

Henco 50 x 50 mm PVDF Pressbogen 90° für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

Used with Roth alu-laserplus pipe and Roth tools

Raxofix Adapter mit SC-Contur für alle Viega-Metallsysteme - Siliziumbronze - PressverbindungenKomponentenEPDM-Dichtelementd1: 20, d2: 15

Uponor 1070545 Sanitärarmatur Elbow