PEX-Systeme - Seite 5

Fitting in gunmetal for Roth manifold

Used for For pipe in 15 mm

Vereinige Cutter für Multibox

Wallofix Wanddose lang TT 15 mm

Roth manifold with 4 outlets. Used together with Roth connection 401975.8xx

Backplate elbow is used in e.g. utility room.

Mehrfachverteiler für Wasser TEA 2 Auslässe 15/10 mm Anschlüsse

Polyethylene insulation for Pettinaroli utility water distribution pipe CC50. Fits 4 circles and can be easily cut as needed.Note: can only be used for CC50 and not CC35.

For assembly of pipes or fittings.

Uponor 1025829 Sanitärarmatur

Transition from 22 mm to pipe thread.

Mehrfachverteiler aus DR Messing. Wird mit Kompressionsarmaturen geliefert.

Fitting in gunmetal for Roth manifold

Manifold cabinet for Roth floorheating manifold

HENCO VISION Gunmetal-Hülsenadapter 20 x 3/4 für Verteilerrohre für Wasser-, Heizungs- und Kühlanlagen Max. 16 bar

HENCO VISION gunmetal nipple adapter 20 x 1/2 to distribution pipes for water, heating and cooling installations Max. 16 bar

For dry wall, push

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Messingkappe für Krümmer. Mit TEA-Oberfläche.

Werkzeug für Flansch an der Wand

Roth QuickBox®-316 for stonewall,18 mm x 3/4" push, db

PEX-Nippel von Tiemme ist ein Fitting für PEX-Rohrinstallationen in Klemmverschraubungssystemen.

Der Tiemme PEX-nippel ist für den Einsatz in Sanitär- und Rohrfittingarbeiten ausgelegt, bei denen eine PEX-Nippelverbindung erforderlich ist.

Eine praktische Wahl, um PEX-Fittingprojekte mit der richtigen Komponente zu versorgen.

Uponor 20 mm Rohrhalterung.

HENCO VISION PVDF transition 15 x 3/4 from distribution pipes for water, heating and cooling installations Max. 16 bar

Wasserdichte Anschlussdose für flexibles Polybuten - nicht geeignet für PE-X / AI / PE-X, PE-Xc - Rotguss - Rp-Gewinde - Schalldämmung. Mit Winkel aus Rotguss und Druckprüfdüse. Modell 5330