PEX-Systeme - Seite 4

Used for Quickbox for C/C fix 150 mm

Uponor 1008661 Sanitärarmatur Armaturenanschluss

Aufhängeclips für PPM-Verteiler zur Montage im Verteilerschrank. Hergestellt aus PPSU.

Termination box, including Q&E termination elbow in DR-brass,white Q&E ring and mounting screws. For water proofconnection with PE-Xa pipes and Uponor conduit in all typesof walls, according to NT VVS 129.

Fitting in gunmetal for Roth manifold

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Verbinden Sie eine 15x2,5 Wandanschluss mit Cc. 150mm auf einer Halterung montiert. Getestet für den Einsatz in feuchten Bereichen. Der Wandanschluss passt zu 15x2,5 PEX und 20/25 gewellten Rohren. Der Messingteil besteht aus DZR-Messing für Trinkwasser. Der Kunststoffteil besteht aus PE.

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpresse

Plaster accessories Wavin type 2.

Terminationsbox, einschließlich Q&E-Terminierungsbogen aus DR-Messing, weißem Q&E-Ring und Montageschrauben. Für wasserdichte Verbindungen mit PE-Xa-Rohren und Uponor-Kanälen in allen Arten von Wänden gemäß NT VVS 129.

Komplettes Anpassungsset für Mehrschichtrohr. Messing mit TEA-Oberfläche.

Roth Manifold Cabinets for manifold type euro and push

Uponor 19 mm Installations-Set

Support bushes for Pex and insert fittings.

Komplettes Anpassungsset für Mehrschichtrohr. Messing

Quickbox double for stone wall

For Roth gunmetal manifold

Uponor 1009004 Sanitärarmatur Kompressionskrümmung

HENCO VISION 2 Zweigverteilungsrohre für Wasser-, Heizungs- und Elektroinstallationen Max. 16 bar

Transition from 22 mm to pipe thread.

Support bushes for Pex and insert fittings.

PEX-Nippel von Tiemme ist ein 3/4"-Fitting für PEX-Rohrinstallationen.

Der Tiemme PEX-Nippel ist bei Klemmverschraubungen für PEX gelistet, unter Hülsen und Nippeln für PEX-Anwendungen.

Eine praktische Fitting-Wahl zum Vervollständigen von PEX-Rohrverbindungen mit klar spezifizierter Größe 3/4".

Hergestellt von PPSU. Q&E-Verteiler mit 3/4-Zoll-Männchen-Gewinde, nur für den Einsatz mit Uponor PE-Xa-Rohren geeignet

PPM modulares Verteilersystem für Trinkwasser aus PPSU (Polyphenylsulfon) mit Bajonett-Adaptern für mehrere Anschlüsse. Maximaler Druck: 10 bar, maximale Temperatur: 70 °C

For assembly of pipes or fittings.