PEX-Systeme - Seite 3

Fitting in gunmetal for Roth manifold

Transition from 18 mm to pipe thread.

Used for Roth manifold in gunmetal.

Uponor 1008679 Sanitärarmatur Armaturenanschluss

Wavin RADIATOR TRIM SET 15X1/2 F/PEX LONG

Manifold i gunmetal, used with female plastic pipe fitting

Transition from 15 mm to pipe thread.

used for Roth EURO-red manifold

Isolierung für Uponor Aqua PLUS Verteiler. Set mit Isolierung, 10 Auslässen und zwei Endabdeckungen.

Komplettes Anpassungsset für Polyethylenrohr. Messing

Used for Roth QuickBox in dry wall

Paar Abschlusskästen inklusive zwei Q&E-Abschlussecken aus DR-Messing mit weißen Q&E-Ringen, Metallmontagehalterung für die Montage c/c 150mm und Montageschrauben. Für wasserdichte Verbindungen mit PE-Xa-Rohren und Uponor-Kanälen in allen Arten von Wänden gemäß NT VVS 129.

Terminationsbox, einschließlich Q&E-Terminierungsbogen aus DR-Messing, weißem Q&E-Ring und Montageschrauben. Für wasserdichte Verbindungen mit PE-Xa-Rohren und Uponor-Kanälen in allen Arten von Wänden gemäß NT VVS 129.

Manifold in gunmetal

Hergestellt aus DR Messing. 3/4 Zoll Innengewinde und Außengewinde. C/C 50 mm. Mit austauschbaren Auslässen.

Used for Roth manifold in gunmetal

For assembly of pipes or fittings.

Vereinige einzelne, schwarze mit Druckverschraubungen mit 15 mm PEX/P.E.R.T. Getestet für den Einsatz in feuchten Bereichen. Der Wandanschluss passt zu 15x2,5 PEX und 20/25 gewellten Rohren. Der Messingteil besteht aus Bronze und ist für Trinkwasser zugelassen. Der Kunststoffteil besteht aus PE.

Uponor Smart Aqua tap elbow Q&E NKB DR 15 mm x 12 L= 43 mm.

Intake Piece for pipe systems with QuickBox

Transition from 15 mm to pipe thread.

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Pair of termination boxes including two Q&E termination elbows in DR-brass with white Q&E rings, metal mounting bracket for mounting c/c 150mm and mounting screws. For water proof connection with PE-Xa pipes and Uponor conduit in all types of walls, according to NT VVS 129.

Slip coupling, push-fit 22mm stainless steel

For stone wall, push